added from archive

Firmware/Duet2Wifi/sys/bed.g

@@ -0,0 +1,8 @@
+; bed.g
+; called to perform automatic bed compensation via G32
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:57 GMT+0400 (+04)
+M561 ; clear any bed transform
+G29  ; probe the bed and enable compensation
+
+

Firmware/Duet2Wifi/sys/config.g

@@ -0,0 +1,95 @@
+; Configuration file for Duet WiFi (firmware version 3)
+; executed by the firmware on start-up
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:58 GMT+0400 (+04)
+
+; General preferences
+G90                                             ; send absolute coordinates...
+M83                                             ; ...but relative extruder moves
+M550 P"Climber7"                              ; set printer name
+M669 K0                                         ; select cartesian! mode
+
+; Network
+M552 S1                                         ; enable network
+M586 P0 S1                                      ; enable HTTP
+M586 P1 S1                                      ; disable FTP
+M586 P2 S0                                      ; disable Telnet
+
+; Drives
+M569 P0 S0                                      ; physical drive 0 (X1)
+M569 P1 S1                                      ; physical drive 1 (Y)
+M569 P2 S0                                      ; physical drive 2 (Z)
+M569 P3 S0                                      ; physical drive 3 (E0)
+M569 P4 S0                                      ; physical drive 4 (E1)
+M569 P5 S1                                      ; physical drive 5 (X2)
+M584 X0 Y1 Z2 U5 E3:4                           ; set drive mapping
+M350 X16 Y16 Z16 U16 E16:16 I1                      ; configure microstepping with interpolation
+M92 X80.00 Y80.00 U80.00 Z400.00 E95.00:95.00       ; set steps per mm
+M566 X900.00 Y900.00 U900.00 Z24.00 E120.00:120.00      ; set maximum instantaneous speed changes (mm/min)
+M203 X6000.00 Y6000.00 U6000.00 Z320.00 E1200.00:1200.00 ; set maximum speeds (mm/min)
+M201 X500.00 Y500.00 U500.00 Z20.00 E250.00:250.00      ; set accelerations (mm/s^2)
+M906 X800 Y800 U800 Z800 E800:800 I30                ; set motor currents (mA) and motor idle factor in per cent
+M84 S30                                         ; Set idle timeout
+
+; Axis Limits
+M208 X-50 Y0 Z0 U0 S1                                ; set axis minima
+M208 X215 Y212 U261.8 Z235 S0                        ; set axis maxima
+
+; Endstops
+M574 X1 S1 P"!xstop"                             ; configure active-high endstop for low end on X via pin xstop
+M574 Y2 S1 P"!ystop"                             ; Y invert and high top
+M574 Z1 S1 P"!zstop"                             ; z invert and at top
+M574 U2 S1 P"!duex.e2stop"                       ; X2 invert and at right
+
+; Z-Probe
+M558 P0 H5 F120 T6000                           ; disable Z probe but set dive height, probe speed and travel speed
+M557 X15:200 Y15:195 S20                        ; define mesh grid
+
+; Heaters
+M308 S0 P"bedtemp" Y"thermistor" T100000 B4138  ; configure sensor 0 as thermistor on pin bedtemp
+M950 H0 C"bedheat" T0                           ; create bed heater output on bedheat and map it to sensor 0
+M307 H0 A130.7 C617.8 D1.7 S1.00 V24.0 B0
+M140 H0                                         ; map heated bed to heater 0
+M143 H0 S120                                    ; set temperature limit for heater 0 to 120C
+
+M308 S1 P"e0temp" Y"thermistor" T100000 B4138   ; configure sensor 1 as thermistor on pin e0temp
+M950 H1 C"e0heat" T1                            ; create nozzle heater output on e0heat and map it to sensor 1
+M307 H1 A494.2 C117.0 D5.8 S1.00 V24.1 B0
+M308 S2 P"e1temp" Y"thermistor" T100000 B4138   ; configure sensor 2 as thermistor on pin e1temp
+M950 H2 C"e1heat" T2                            ; create nozzle heater output on e1heat and map it to sensor 2
+M307 H2 A487.7 C112.3 D4.6 S1.00 V24.1 B0
+
+
+; Fans
+M950 F0 C"fan0" Q500                            ; create fan 0 on pin fan0 and set its frequency
+M106 P0 C"HOT1" S1 H1 T45                       ; set fan 0 name and value. Thermostatic control is turned on
+M950 F1 C"fan1" Q500                            ; create fan 1 on pin fan1 and set its frequency
+M106 P1 C"MOD1" S0 H-1                          ; set fan 1 name and value. Thermostatic control is turned off
+M950 F2 C"fan2" Q500                            ; create fan 2 on pin fan2 and set its frequency
+M106 P2 C"HOT2" S1 H2 T45                       ; set fan 2 name and value. Thermostatic control is turned on
+M950 F3 C"duex.fan3" Q500                       ; create fan 3 on pin duex.fan3 and set its frequency
+M106 P3 C"MOD2" S0 H-1                          ; set fan 3 name and value. Thermostatic control is turned off
+
+; Tools
+M563 P0 S"LEFTHEAD" D0 H1 F1                  ; define tool 0
+G10 P0 X0 Y0 Z0                                 ; set tool 0 axis offsets
+G10 P0 R0 S0                                    ; set initial tool 0 active and standby temperatures to 0C
+M563 P1 S"RIGHTHEAD" D1 H2 X3 F3                 ; define tool 1
+G10 P1 U0 Y0 Z0                                 ; set tool 1 axis offsets
+G10 P1 R0 S0                                    ; set initial tool 1 active and standby temperatures to 0C
+
+; tool for duplicate mode
+M563 P2 S"DUPLICY" D0:1 H1:2 X0:3 F1:3
+G10 P2 X50 Y0 U-100 S0 R0
+M567 P2 E1:1 ; set mix ratio 100% on both extruders
+M568 P2 S1 ; turn on mixing for tool 2
+
+
+; Custom settings are not defined
+
+; Miscellaneous
+M575 P1 S1 B57600                               ; enable support for PanelDue
+
+; Load store settings
+M501
+

Firmware/Duet2Wifi/sys/config.json

@@ -0,0 +1 @@
+{"board":"duetwifi10","expansion_boards":["Duex 5"],"firmware":3,"standalone":true,"nvram":false,"auto_save":{"enabled":false,"save_threshold":10,"resume_threshold":11,"gcodes_to_run":"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"},"display":{"type":0,"encoder_steps":4,"spi_frequency":2000000,"menus":[{"name":"main","value":""}],"images":[]},"panelDue":true,"geometry":{"type":"corexy","mins":[0,0,0],"maxes":[200,205,200],"delta_radius":105.6,"homed_height":250,"low_dive_height":false,"max_carriage_travel":260,"print_radius":85,"rod_length":215,"z_min":0},"drives":[{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":100,"acceleration":500,"current":800,"driver":0,"driver_v3":"0.0","endstop_pin":"xstop","endstop_type":1,"endstop_location":1},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":100,"acceleration":500,"current":800,"driver":1,"driver_v3":"0.1","endstop_pin":"ystop","endstop_type":1,"endstop_location":1},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":4000,"instant_dv":0.2,"max_speed":3,"acceleration":20,"current":800,"driver":2,"driver_v3":"0.2","endstop_pin":"zstop","endstop":null,"endstop_type":1,"endstop_location":1},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":420,"instant_dv":2,"max_speed":20,"acceleration":250,"current":800,"driver":3,"driver_v3":"0.3"},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":420,"instant_dv":2,"max_speed":20,"acceleration":250,"current":800,"driver":4,"driver_v3":"0.4"}],"idle":{"used":true,"factor":30,"timeout":30},"homing_speed_fast":30,"homing_speed_slow":6,"travel_speed":100,"z_dive_height":5,"slow_homing":false,"probe":{"type":"noprobe","recovery_time":0.4,"trigger_height":2.5,"trigger_value":500,"x_offset":0,"y_offset":0,"speed":2,"deploy":false,"points":[],"pwm_channel":3,"pwm_inverted":true,"pwm_pin":null,"input_pin":null,"modulation_pin":null},"bed_is_nozzle":false,"bed":{"present":true,"use_pid":false,"heater":0},"chamber":{"present":false,"use_pid":false,"heater":2},"heaters":[{"temp_limit":120,"scale_factor":100,"series":4700,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":0,"sensor":0,"output_pin":"bedheat","sensor_type":"thermistor","sensor_pin":"bedtemp"},{"temp_limit":280,"scale_factor":100,"series":4700,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":1,"sensor":1,"output_pin":"e0heat","sensor_type":"thermistor","sensor_pin":"e0temp"},{"temp_limit":280,"scale_factor":100,"series":4700,"thermistor":100000,"beta":4138,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":2,"sensor":1,"output_pin":"e1heat","sensor_type":"thermistor","sensor_pin":"e1temp"}],"num_nozzles":2,"toolchange_wait_for_temperatures":true,"generate_t_code":false,"tools":[{"mix_ratio":[],"number":0,"name":"LEFTHEAD","extruders":[0],"heaters":[1],"fans":[0,1],"x_offset":0,"y_offset":0,"z_offset":0},{"mix_ratio":[],"number":1,"name":"RIGHTHEAD","extruders":[1],"heaters":[2],"fans":[0,3],"x_offset":0,"y_offset":0,"z_offset":0}],"compensation_x_offset":15,"compensation_y_offset":15,"peripheral_points":3,"halfway_points":3,"calibration_factors":6,"probe_radius":85,"mesh":{"x_min":15,"x_max":200,"y_min":15,"y_max":195,"radius":85,"spacing":20},"home_first":false,"orthogonal":{"compensation":false,"height":50,"deviations":[0,0,0]},"network":{"enabled":true,"mac_address":"","name":"My Printer","password":"","ssid":"","ssid_password":"","dhcp":true,"ip":"192.168.1.20","netmask":"255.255.255.0","gateway":"192.168.1.254","protocols":{"http":true,"ftp":false,"telnet":false}},"fans":[{"name":"HOT1","value":100,"inverted":false,"frequency":500,"thermostatic":true,"heaters":[1],"trigger_temperature":45,"output_pin":"fan0"},{"name":"MOD1","value":0,"inverted":false,"frequency":500,"thermostatic":false,"heaters":[2],"trigger_temperature":45,"output_pin":"fan1"},{"name":"HOT2","value":100,"inverted":false,"frequency":500,"thermostatic":true,"heaters":[2],"trigger_temperature":45,"output_pin":"fan2"},{"name":"MOD2","value":0,"inverted":false,"frequency":500,"thermostatic":false,"heaters":[1,2],"trigger_temperature":45,"output_pin":"duex.fan3"}],"custom_settings":""}

Firmware/Duet2Wifi/sys/dwc2settings.json

@@ -0,0 +1 @@
+{"main":{"language":"ru","lastHostname":"192.168.88.142","darkTheme":false,"useBinaryPrefix":true,"disableAutoComplete":false,"settingsStorageLocal":false,"settingsSaveDelay":2000,"cacheStorageLocal":true,"cacheSaveDelay":4000,"notifications":{"errorsPersistent":true,"timeout":5000},"webcam":{"url":"","updateInterval":5000,"liveUrl":"","useFix":false,"embedded":false,"rotation":0,"flip":"none"}},"machine":{"ajaxRetries":2,"updateInterval":250,"extendedUpdateEvery":20,"fileTransferRetryThreshold":358400,"crcUploads":true,"pingInterval":2000,"babystepAmount":0.05,"codes":["G1 H1 X-5 F360","G1 H1 X5 F360","G1 H1 Y-10 F360","G1 H1 Y210 F1800","G1 H2 X-5 F360","G1 H2 X5 F360","G1 H2 Z5 F6000","G1 Y-1","G1 Y-1 F360","G1 Y-5 F6000","G1 Y1","G91","M0","M1","M108","M119","M122","M18","M27","M303 H0 S60","M303 H1 S210","M303 H2 S210","M500","M503","M563 P1 S\"RIGHTHEAD\" D1 H2 F3","M564 H0","M564 H0 S0","M564 S0 H0","M566","M574 U2 S1 P\"!duex.e2_stop\"","M574 U2 S1 P\"!duex.e2stop\"","M574 U2 S1 P\"!duex.e3stop\"","M574 U2 S1 P\"!e2_stop\"","M574 U2 S1 P\"^!duex.e2stop\"","M584","M584 X0 Y1 Z2 U5 E3:4","M84","M912 P0","T0","g1 u0","g1 u210","g1 x0","g1 x210","g1 x215","g1 x220","g90","g91","m119"],"displayedExtraTemperatures":[8],"displayedExtruders":[0,1],"displayedFans":[-1,1,0],"moveSteps":{"X":[100,50,10,1,0.1],"Y":[100,50,10,1,0.1],"Z":[50,25,5,0.5,0.05],"default":[100,50,10,1,0.1]},"moveFeedrate":6000,"extruderAmounts":[100,50,20,10,5,1],"extruderFeedrates":[60,30,15,5,1],"temperatures":{"tool":{"active":[250,240,235,220,205,195,0],"standby":[220,210,180,160,140,0]},"bed":{"active":[110,100,90,70,65,60,0],"standby":[40,30,0]},"chamber":[90,80,70,60,50,40,0]},"spindleRPM":[10000,75000,5000,2500,1000,0]}}

Firmware/Duet2Wifi/sys/filaments.csv

@@ -0,0 +1,4 @@
+RepRapFirmware filament assignment file v1 generated at 2020-10-02 22:52
+extruder,filament
+1,PETG
+0,HIPS

Firmware/Duet2Wifi/sys/homeall.g

@@ -0,0 +1,24 @@
+; homeall.g
+; called to home all axes
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:58 GMT+0400 (+04)
+G91                     ; relative positioning
+G1 H2 Z5 F6000          ; lift Z relative to current position
+G1 H1 X-270 U275 Y210 F1800  ; move quickly to X or Y endstop and stop there (first pass)
+G1 H1 X-270             ; home X1 axis
+G1 H1 U275             ; home X2 axis
+G1 H1 Y210              ; home Y axis
+G1 X5 U-5 Y-5 F6000          ; go back a few mm
+G1 H1 X-270 F360        ; move slowly to X axis endstop once more (second pass)
+G1 H1 U275 F360        ; move slowly to X2 axis endstop once more (second pass)
+G1 H1 Y210             ; then move slowly to Y axis endstop
+G1 H1 Z-255 F360        ; move Z down stopping at the endstop
+G90                     ; absolute positioning
+G92 Z0                  ; set Z position to axis minimum (you may want to adjust this)
+
+; Uncomment the following lines to lift Z after probing
+G91                    ; relative positioning
+G1 Z5 F100             ; lift Z relative to current position
+G90                    ; absolute positioning
+
+

Firmware/Duet2Wifi/sys/homeu.g

@@ -0,0 +1,7 @@
+G91               ; relative positioning
+G1 H2 Z5 F6000    ; lift Z relative to current position
+G1 H1 U275 F1800 ; move quickly to X axis endstop and stop there (first pass)
+G1 U-5 F6000       ; go back a few mm
+G1 H1 U275 F360  ; move slowly to X axis endstop once more (second pass)
+G1 H2 Z-5 F6000   ; lower Z again
+G90

Firmware/Duet2Wifi/sys/homex.g

@@ -0,0 +1,12 @@
+; homex.g
+; called to home the X axis
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:58 GMT+0400 (+04)
+G91               ; relative positioning
+G1 H2 Z5 F6000    ; lift Z relative to current position
+G1 H1 X-270 F1800 ; move quickly to X axis endstop and stop there (first pass)
+G1 X5 F6000       ; go back a few mm
+G1 H1 X-270 F360  ; move slowly to X axis endstop once more (second pass)
+G1 H2 Z-5 F6000   ; lower Z again
+G90               ; absolute positioning
+

Firmware/Duet2Wifi/sys/homey.g

@@ -0,0 +1,12 @@
+; homey.g
+; called to home the Y axis
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:58 GMT+0400 (+04)
+G91               ; relative positioning
+G1 H2 Z5 F6000    ; lift Z relative to current position
+G1 H1 Y210 F1800 ; move quickly to Y axis endstop and stop there (first pass)
+G1 Y-5 F6000       ; go back a few mm
+G1 H1 Y210 F360  ; move slowly to Y axis endstop once more (second pass)
+G1 H2 Z-5 F6000   ; lower Z again
+G90               ; absolute positioning
+

Firmware/Duet2Wifi/sys/homez.g

@@ -0,0 +1,14 @@
+; homez.g
+; called to home the Z axis
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:58 GMT+0400 (+04)
+G91               ; relative positioning
+G1 H2 Z5 F6000    ; lift Z relative to current position
+G1 H1 Z-205 F1800 ; move Z down until the endstop is triggered
+G92 Z0            ; set Z position to axis minimum (you may want to adjust this)
+
+; Uncomment the following lines to lift Z after probing
+;G91              ; relative positioning
+;G1 Z5 F100       ; lift Z relative to current position
+;G90              ; absolute positioning
+

Firmware/Duet2Wifi/sys/pause.g

@@ -0,0 +1,10 @@
+; pause.g
+; called when a print from SD card is paused
+;
+
+M83				; relative extruder moves
+G1 E-2 F3600	; retract 2mm
+G91				; relative positioning
+G1 Z5 F360		; lift Z by 5mm
+G90				; absolute positioning
+G1 H2 X-50 U262 F6000 ; park both heads

Firmware/Duet2Wifi/sys/resume.g

@@ -0,0 +1,7 @@
+; resume.g
+; called before a print from SD card is resumed
+;
+G1 R1 X0 Y0 Z5 F6000	; go to 5mm above position of the last print move
+G1 R1 X0 Y0 Z0 F500		; move to the resume location
+M83						; relative extruder moves
+G1 E2 F3600				; undo the retraction

Firmware/Duet2Wifi/sys/sleep.g

@@ -0,0 +1,5 @@
+; sleep.g
+; called when M1 (Sleep) is being processed
+;
+; generated by RepRapFirmware Configuration Tool v3.1.4 on Thu Oct 01 2020 17:57:59 GMT+0400 (+04)
+

Firmware/Duet2Wifi/sys/stop.g

@@ -0,0 +1,3 @@
+; stop.g
+; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled)
+;

Firmware/Duet2Wifi/sys/tfree0.g

@@ -0,0 +1,11 @@
+; tfree0.g
+; called when tool 0 is freed
+;
+M83 				; relative extruder movement
+G1 E-2 F3600 		; retract 2mm
+M106 S0				; turn off our print cooling fan
+G91					; relative axis movement
+G1 Z3 F500			; up 3mm
+G90					; absolute axis movement
+G1 H2 X-48 F6000	; park the X carriage at -48mm
+G1 Z-3 F500			; return Z ?

Firmware/Duet2Wifi/sys/tfree1.g

@@ -0,0 +1,11 @@
+; tfree1.g
+; called when tool 1 is freed
+;
+M83 				; relative extruder movement
+G1 E-2 F3600 		; retract 2mm
+M106 S0				; turn off our print cooling fan
+G91					; relative axis movement
+G1 Z3 F500			; up 3mm
+G90					; absolute axis movement
+G1 H2 U262 F6000	; park the X2 carriage
+G1 Z-3 F500			; return Z ?

Firmware/Duet2Wifi/sys/tfree2.g

@@ -0,0 +1,11 @@
+; free duplicate mode tools
+;
+M83 				; relative extruder movement
+G1 E-2 F3600 		; retract 2mm
+M106 S0				; turn off our print cooling fan
+G91					; relative axis movement
+G1 Z3 F500			; up 3mm
+G90					; absolute axis movement
+G28 X U				; home the X and U carriages
+G1 Z-3 F500			; return Z ?
+

Firmware/Duet2Wifi/sys/tpost0.g

@@ -0,0 +1,8 @@
+; tpost0.g
+; called after tool 0 has been selected
+;
+
+M106 R2				; restore print cooling fan speed
+M116 P0				; wait for tool 0 heaters to reach operating temperature
+M83					; relative extruder movement
+G1 E2 F3600			; extrude 2mm

Firmware/Duet2Wifi/sys/tpost1.g

@@ -0,0 +1,8 @@
+; tpost1.g
+; called after tool 1 has been selected
+;
+
+M106 R2				; restore print cooling fan speed
+M116 P1				; wait for tool 0 heaters to reach operating temperature
+M83					; relative extruder movement
+G1 E2 F3600			; extrude 2mm

Firmware/Duet2Wifi/sys/tpost2.g

@@ -0,0 +1,10 @@
+; tpost2.g
+; called after tool 2 has been selected
+;
+
+M106 R2				; restore print cooling fan speed
+M116 P2				; wait for tool 0 heaters to reach operating temperature
+M83					; relative extruder movement
+M567 P2 E1:1		; set tool mix ratio
+M568 P2 S1			; turn on mixing
+G1 E2 F3600			; extrude 2mm from both extruders

Firmware/Duet2Wifi/sys/tpre0.g

@@ -0,0 +1,4 @@
+; tpre0.g
+; called before tool 0 is selected
+;
+

Firmware/Duet2Wifi/sys/tpre1.g

@@ -0,0 +1,3 @@
+; tpre1.g
+; called before tool 1 is selected
+;

Firmware/Duet2Wifi/sys/tpre2.g

@@ -0,0 +1,3 @@
+; tpre2.g
+; called before tool 2 is selected
+;