added from archive

Slicers/PrusaSlicer/Tenlog.ini

@@ -0,0 +1,488 @@
+# Print profiles for the Creality printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Tenlog
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.1
+# Where to get the updates from?
+config_update_url = https://raw.githubusercontent.com/kanocz/3dconfigs/master/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:TenlogD3Pro]
+name = Tenlog D3 Pro
+variants = 0.4
+technology = FFF
+family = TENLOG
+default_materials = Generic PLA @TENLOG; Generic PETG @TENLOG; Generic ABS @TENLOG; Prusament PLA @TENLOG; Prusament PETG @TENLOG
+bed_model = D3Hero_Splitter.stl
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 60
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirts = 1
+skirt_distance = 2
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+travel_speed = 60
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.1
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.08mm @TENLOG]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm @TENLOG]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.12mm @TENLOG]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.16mm @TENLOG]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20mm @TENLOG]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.24mm @TENLOG]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:0.28mm @TENLOG]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4
+
+[print:*soluble*]
+wipe_tower = 0
+overhangs = 1
+support_material = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0
+support_material_extruder = 1
+support_material_interface_extruder = 2
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 12
+support_material_pattern = honeycomb
+support_material_spacing = 1
+support_material_synchronize_layers = 1
+support_material_with_sheath = 1
+
+[print:0.08mm soluble @TENLOG]
+inherits = *0.08mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 4
+
+[print:0.10mm soluble @TENLOG]
+inherits = *0.10mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 4
+
+[print:0.12mm soluble @TENLOG]
+inherits = *0.12mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 4
+
+[print:0.16mm soluble @TENLOG]
+inherits = *0.16mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 3
+
+[print:0.20mm soluble @TENLOG]
+inherits = *0.20mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 3
+
+[print:0.24mm soluble @TENLOG]
+inherits = *0.24mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 2
+
+[print:0.28mm soluble @TENLOG]
+inherits = *0.28mm*; *soluble*
+compatible_printers_condition = printer_model=~/(Tenlog).*/ and nozzle_diameter[0]==0.4 and printer_model=~/.*(Dual).*/
+support_material_interface_layers = 2
+
+# Common filament preset
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TENLOG.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 50
+fan_below_layer_time = 100
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 499
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+temperature = 205
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 409
+first_layer_bed_temperature = 70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 11
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 299
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 245
+
+[filament:Generic PLA @TENLOG]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @TENLOG]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @TENLOG]
+inherits = *ABS*
+first_layer_bed_temperature = 90
+bed_temperature = 90
+filament_vendor = Generic
+
+[filament:Prusament PLA @TENLOG]
+inherits = *PLA*
+filament_vendor = Prusa Polymers
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 599
+filament_density = 1.24
+filament_colour = #F94D0C
+
+[filament:Prusament PETG @TENLOG]
+inherits = *PET*
+filament_vendor = Prusa Polymers
+temperature = 245
+bed_temperature = 70
+first_layer_temperature = 245
+first_layer_bed_temperature = 70
+filament_cost = 699
+filament_density = 1.27
+filament_colour = #F94D0C
+
+[filament:Generic PVA @TENLOG]
+inherits = *PLA*
+filament_vendor = Generic
+filament_cost = 1598
+filament_density = 1.23
+cooling = 0
+fan_always_on = 0
+filament_colour = #EEEEEE
+filament_max_volumetric_speed = 2.5
+filament_soluble = 1
+filament_type = PVA
+first_layer_temperature = 215
+temperature = 215
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
+between_objects_gcode = 
+pause_print_gcode = 
+deretract_speed = 0
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.3
+min_layer_height = 0.07
+max_print_height = 250
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+single_extruder_multi_material = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model = 
+default_print_profile = 0.16mm @TENLOG
+default_filament_profile = Generic PLA @TENLOG
+
+[printer:TenlogD3Pro]
+inherits = *common*
+printer_variant = 0.4
+max_layer_height = 0.28
+min_layer_height = 0.08
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_speed = 40
+deretract_speed = 40
+retract_before_wipe = 70%
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+bed_shape = 5x5,305x5,305x305,5x305
+printer_model = Tenlog D3 Pro
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TENLOG\nPRINTER_MODEL_D3PRO
+max_print_height = 350
+
+
+[printer:TenlogD3ProDual]
+inherits = TenlogD3Pro
+printer_model = Tenlog D3 Pro Dual
+bed_custom_model =
+deretract_speed = 40,40
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG28 X Y\nM140 S0 ; turn off heatbed\nM104 S0 T1 ; turn off temperature E1\nM104 S0 T0 ; turn off temperature E0\nM107 ; turn off fan\nM84 X Y E ; disable motors\n
+extruder_colour = #FFFF00;#80804C
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 1.5,1.5
+retract_length_toolchange = 1.6,1.6
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 40,40
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all\nM107 ;start with the fan off\n\nM104 S{first_layer_temperature[0] - 25} T0\nM104 S{first_layer_temperature[1] - 25} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0] - 25} T0 ; wait for extruder temp E0\nM109 S{first_layer_temperature[1] - 25} T1 ; wait for extruder temp E1\n\nG1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n\n
+toolchange_gcode = ; start toolchange\n\n{if layer_num < 1}\nM104 S{first_layer_temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{else}\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{endif}\n\n{if current_extruder == 0 }\nG1 F3000 X-50\n{endif}\n{if current_extruder == 1 }\nG1 F3000 X354\n{endif}\n\n; change to new extruder\n\nT[next_extruder] ; change to next extruder\n{if layer_num < 1}\nM104 S{first_layer_temperature[next_extruder]} T[next_extruder] ; set first layer working temperature\nM109 S{first_layer_temperature[next_extruder]} T[next_extruder] ; and wait for it\n{else}\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n{endif}\n\nG1 F1000 E4.0 ;purge\nG4 S3 ;wait a little bit\n\n{if next_extruder == 0 }\nG1 F3000 X-20\nG1 F3000 X-50\n{endif}\n{if next_extruder == 1 }\nG1 F3000 X325\nG1 F3000 X354\n{endif}\n\n{if layer_num > 0}\nG1 F{deretract_speed[next_extruder]*60} E-{retract_length_toolchange[next_extruder]}\n{endif}\n
+wipe = 1,1

Slicers/Simplify3D/Tenlog TL-D3 Pro_PLA_BS_02 Powered by Simon Lernpeiss.fff

@@ -0,0 +1,363 @@
+<?xml version="1.0"?>
+<profile name="Tenlogy" version="2020-05-13 18:33:35" app="S3D-Software 4.1.2">
+  <baseProfile>Default</baseProfile>
+  <printMaterial>PLA</printMaterial>
+  <printQuality>Medium</printQuality>
+  <printExtruders>All Extruders</printExtruders>
+  <extruder name="Extruder 1">
+    <toolheadNumber>0</toolheadNumber>
+    <diameter>0.4</diameter>
+    <autoWidth>0</autoWidth>
+    <width>0.45</width>
+    <extrusionMultiplier>1</extrusionMultiplier>
+    <useRetract>1</useRetract>
+    <retractionDistance>1.5</retractionDistance>
+    <extraRestartDistance>0</extraRestartDistance>
+    <retractionZLift>0</retractionZLift>
+    <retractionSpeed>2400</retractionSpeed>
+    <useCoasting>0</useCoasting>
+    <coastingDistance>0.2</coastingDistance>
+    <useWipe>1</useWipe>
+    <wipeDistance>3</wipeDistance>
+  </extruder>
+  <extruder name="Extruder 2">
+    <toolheadNumber>1</toolheadNumber>
+    <diameter>0.4</diameter>
+    <autoWidth>0</autoWidth>
+    <width>0.4</width>
+    <extrusionMultiplier>0.96</extrusionMultiplier>
+    <useRetract>1</useRetract>
+    <retractionDistance>1.5</retractionDistance>
+    <extraRestartDistance>0</extraRestartDistance>
+    <retractionZLift>0</retractionZLift>
+    <retractionSpeed>1800</retractionSpeed>
+    <useCoasting>0</useCoasting>
+    <coastingDistance>0.2</coastingDistance>
+    <useWipe>1</useWipe>
+    <wipeDistance>5</wipeDistance>
+  </extruder>
+  <primaryExtruder>0</primaryExtruder>
+  <layerHeight>0.2</layerHeight>
+  <topSolidLayers>6</topSolidLayers>
+  <bottomSolidLayers>5</bottomSolidLayers>
+  <perimeterOutlines>2</perimeterOutlines>
+  <printPerimetersInsideOut>1</printPerimetersInsideOut>
+  <startPointOption>2</startPointOption>
+  <startPointOriginX>0</startPointOriginX>
+  <startPointOriginY>0</startPointOriginY>
+  <sequentialIslands>0</sequentialIslands>
+  <spiralVaseMode>0</spiralVaseMode>
+  <firstLayerHeightPercentage>100</firstLayerHeightPercentage>
+  <firstLayerWidthPercentage>100</firstLayerWidthPercentage>
+  <firstLayerUnderspeed>0.5</firstLayerUnderspeed>
+  <useRaft>1</useRaft>
+  <raftExtruder>1</raftExtruder>
+  <raftTopLayers>2</raftTopLayers>
+  <raftBaseLayers>1</raftBaseLayers>
+  <raftOffset>3</raftOffset>
+  <raftSeparationDistance>0</raftSeparationDistance>
+  <raftTopInfill>100</raftTopInfill>
+  <aboveRaftSpeedMultiplier>0.3</aboveRaftSpeedMultiplier>
+  <useSkirt>1</useSkirt>
+  <skirtExtruder>1</skirtExtruder>
+  <skirtLayers>1</skirtLayers>
+  <skirtOutlines>2</skirtOutlines>
+  <skirtOffset>4</skirtOffset>
+  <usePrimePillar>0</usePrimePillar>
+  <primePillarExtruder>999</primePillarExtruder>
+  <primePillarWidth>12</primePillarWidth>
+  <primePillarLocation>7</primePillarLocation>
+  <primePillarSpeedMultiplier>1</primePillarSpeedMultiplier>
+  <useOozeShield>0</useOozeShield>
+  <oozeShieldExtruder>999</oozeShieldExtruder>
+  <oozeShieldOffset>2</oozeShieldOffset>
+  <oozeShieldOutlines>1</oozeShieldOutlines>
+  <oozeShieldSidewallShape>1</oozeShieldSidewallShape>
+  <oozeShieldSidewallAngle>30</oozeShieldSidewallAngle>
+  <oozeShieldSpeedMultiplier>1</oozeShieldSpeedMultiplier>
+  <infillExtruder>0</infillExtruder>
+  <internalInfillPattern>Grid</internalInfillPattern>
+  <externalInfillPattern>Rectilinear</externalInfillPattern>
+  <infillPercentage>25</infillPercentage>
+  <outlineOverlapPercentage>15</outlineOverlapPercentage>
+  <infillExtrusionWidthPercentage>100</infillExtrusionWidthPercentage>
+  <minInfillLength>5</minInfillLength>
+  <infillLayerInterval>1</infillLayerInterval>
+  <internalInfillAngles>45,-45</internalInfillAngles>
+  <overlapInternalInfillAngles>1</overlapInternalInfillAngles>
+  <externalInfillAngles>45,-45</externalInfillAngles>
+  <generateSupport>1</generateSupport>
+  <supportExtruder>1</supportExtruder>
+  <supportInfillPercentage>30</supportInfillPercentage>
+  <supportExtraInflation>0.5</supportExtraInflation>
+  <supportBaseLayers>1</supportBaseLayers>
+  <denseSupportExtruder>1</denseSupportExtruder>
+  <denseSupportLayers>2</denseSupportLayers>
+  <denseSupportInfillPercentage>98</denseSupportInfillPercentage>
+  <supportLayerInterval>1</supportLayerInterval>
+  <supportHorizontalPartOffset>0.3</supportHorizontalPartOffset>
+  <supportUpperSeparationLayers>0</supportUpperSeparationLayers>
+  <supportLowerSeparationLayers>0</supportLowerSeparationLayers>
+  <supportType>1</supportType>
+  <supportGridSpacing>2</supportGridSpacing>
+  <maxOverhangAngle>60</maxOverhangAngle>
+  <supportAngles>0</supportAngles>
+  <temperatureController name="Extruder 1">
+    <temperatureNumber>0</temperatureNumber>
+    <isHeatedBed>0</isHeatedBed>
+    <stabilizeAtStartup>1</stabilizeAtStartup>
+    <setpoint layer="1" temperature="215"/>
+  </temperatureController>
+  <temperatureController name="Extruder 2">
+    <temperatureNumber>1</temperatureNumber>
+    <isHeatedBed>0</isHeatedBed>
+    <stabilizeAtStartup>1</stabilizeAtStartup>
+    <setpoint layer="1" temperature="220"/>
+  </temperatureController>
+  <temperatureController name="Heated Bed">
+    <temperatureNumber>0</temperatureNumber>
+    <isHeatedBed>1</isHeatedBed>
+    <stabilizeAtStartup>1</stabilizeAtStartup>
+    <setpoint layer="1" temperature="60"/>
+  </temperatureController>
+  <fanSpeed>
+    <setpoint layer="1" speed="0"/>
+    <setpoint layer="2" speed="50"/>
+    <setpoint layer="3" speed="100"/>
+  </fanSpeed>
+  <blipFanToFullPower>0</blipFanToFullPower>
+  <adjustSpeedForCooling>1</adjustSpeedForCooling>
+  <minSpeedLayerTime>15</minSpeedLayerTime>
+  <minCoolingSpeedSlowdown>20</minCoolingSpeedSlowdown>
+  <increaseFanForCooling>0</increaseFanForCooling>
+  <minFanLayerTime>45</minFanLayerTime>
+  <maxCoolingFanSpeed>100</maxCoolingFanSpeed>
+  <increaseFanForBridging>0</increaseFanForBridging>
+  <bridgingFanSpeed>100</bridgingFanSpeed>
+  <use5D>1</use5D>
+  <relativeEdistances>0</relativeEdistances>
+  <allowEaxisZeroing>1</allowEaxisZeroing>
+  <independentExtruderAxes>0</independentExtruderAxes>
+  <includeM10123>0</includeM10123>
+  <stickySupport>1</stickySupport>
+  <applyToolheadOffsets>0</applyToolheadOffsets>
+  <gcodeXoffset>0</gcodeXoffset>
+  <gcodeYoffset>0</gcodeYoffset>
+  <gcodeZoffset>0</gcodeZoffset>
+  <overrideMachineDefinition>1</overrideMachineDefinition>
+  <machineTypeOverride>0</machineTypeOverride>
+  <strokeXoverride>305</strokeXoverride>
+  <strokeYoverride>305</strokeYoverride>
+  <strokeZoverride>360</strokeZoverride>
+  <originOffsetXoverride>0</originOffsetXoverride>
+  <originOffsetYoverride>0</originOffsetYoverride>
+  <originOffsetZoverride>0</originOffsetZoverride>
+  <homeXdirOverride>-1</homeXdirOverride>
+  <homeYdirOverride>-1</homeYdirOverride>
+  <homeZdirOverride>-1</homeZdirOverride>
+  <flipXoverride>1</flipXoverride>
+  <flipYoverride>-1</flipYoverride>
+  <flipZoverride>1</flipZoverride>
+  <toolheadOffsets>0,0|0,0|0,0|0,0|0,0|0,0</toolheadOffsets>
+  <overrideFirmwareConfiguration>1</overrideFirmwareConfiguration>
+  <firmwareTypeOverride>RepRap (Marlin/Repetier/Sprinter)</firmwareTypeOverride>
+  <GPXconfigOverride>r2</GPXconfigOverride>
+  <baudRateOverride>115200</baudRateOverride>
+  <overridePrinterModels>0</overridePrinterModels>
+  <printerModelsOverride></printerModelsOverride>
+  <startingGcode>G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z0.5 F9000 ;move the platform down 0.5mm,,,,M117 Printing...</startingGcode>
+  <layerChangeGcode></layerChangeGcode>
+  <retractionGcode></retractionGcode>
+  <toolChangeGcode>,,{IF NEWTOOL=1}T1,;switch to new tool and do these things,;{IF NEWTOOL=1}M109 S220 T1 ;heat right tool to 240C before moving,;{IF NEWTOOL=1}G1 F800 E-3.0,{IF NEWTOOL=1}G1 F800 E5.0 ;Default purge,{IF NEWTOOL=1}G4 S5 ;Stabilize Hotend's pressure dwell 5 seconds,{IF NEWTOOL=1}G92 E0 ;Zero extruder,{IF NEWTOOL=1}G1 F10000 X325,{IF NEWTOOL=1}G1 F2400 E-3 ;Retract,{IF NEWTOOL=1}G1 F10000 X354,{IF NEWTOOL=1}G1 F800 E-5 ;Retract,{IF NEWTOOL=1}G1 F10000,,,{IF NEWTOOL=0}T0,; switch to new tool and do these things,;{IF NEWTOOL=0}M104 S200 T1 ;let right extruder cool to 200 while unused,;{IF NEWTOOL=0}G1 F1200 E-2.0,{IF NEWTOOL=0}G1 F1000 E5.0 ;Default purge,{IF NEWTOOL=0}G4 S2 ;Stabilize Hotend's pressure with dwell for 2 seconds,{IF NEWTOOL=0}G92 E0 ;Zero extruder,{IF NEWTOOL=0}G1 F10000 X-20,{IF NEWTOOL=0}G1 F2400 E-3 ;Retract,{IF NEWTOOL=0}G1 F10000 X-50,{IF NEWTOOL=0}G1 F2400 E-5 ;Retract,{IF NEWTOOL=0}G1 F10000,</toolChangeGcode>
+  <endingGcode>M104 T0 S0 ;1st extruder heater off,M104 T1 S0 ;2nd extruder heater off,M140 S0 ;heated bed heater off (if you have it),G91 ;relative positioning,G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure,G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more,G28 X0 Y300 ;move X/Y to min endstops, so the head is out of the way,M84 ;steppers off,G90 ;absolute positioning</endingGcode>
+  <exportFileFormat>gcode</exportFileFormat>
+  <celebration>0</celebration>
+  <celebrationSong>Random Song</celebrationSong>
+  <postProcessing></postProcessing>
+  <defaultSpeed>3600</defaultSpeed>
+  <outlineUnderspeed>0.5</outlineUnderspeed>
+  <solidInfillUnderspeed>0.8</solidInfillUnderspeed>
+  <supportUnderspeed>0.8</supportUnderspeed>
+  <rapidXYspeed>15000</rapidXYspeed>
+  <rapidZspeed>1002</rapidZspeed>
+  <minBridgingArea>50</minBridgingArea>
+  <bridgingExtraInflation>0</bridgingExtraInflation>
+  <bridgingExtrusionMultiplier>1</bridgingExtrusionMultiplier>
+  <bridgingSpeedMultiplier>1</bridgingSpeedMultiplier>
+  <useFixedBridgingAngle>0</useFixedBridgingAngle>
+  <fixedBridgingAngle>0</fixedBridgingAngle>
+  <applyBridgingToPerimeters>0</applyBridgingToPerimeters>
+  <filamentDiameters>1.75|1.75|1.75|1.75|1.75|1.75</filamentDiameters>
+  <filamentPricesPerKg>800|1500|46|46|46|46</filamentPricesPerKg>
+  <filamentDensities>1|1|1.25|1.25|1.25|1.25</filamentDensities>
+  <useMinPrintHeight>0</useMinPrintHeight>
+  <minPrintHeight>0</minPrintHeight>
+  <useMaxPrintHeight>0</useMaxPrintHeight>
+  <maxPrintHeight>0</maxPrintHeight>
+  <useDiaphragm>0</useDiaphragm>
+  <diaphragmLayerInterval>20</diaphragmLayerInterval>
+  <robustSlicing>1</robustSlicing>
+  <mergeAllIntoSolid>0</mergeAllIntoSolid>
+  <onlyRetractWhenCrossingOutline>0</onlyRetractWhenCrossingOutline>
+  <retractBetweenLayers>1</retractBetweenLayers>
+  <useRetractionMinTravel>0</useRetractionMinTravel>
+  <retractionMinTravel>3</retractionMinTravel>
+  <retractWhileWiping>1</retractWhileWiping>
+  <onlyWipeOutlines>0</onlyWipeOutlines>
+  <avoidCrossingOutline>0</avoidCrossingOutline>
+  <maxMovementDetourFactor>3</maxMovementDetourFactor>
+  <toolChangeRetractionDistance>3</toolChangeRetractionDistance>
+  <toolChangeExtraRestartDistance>0</toolChangeExtraRestartDistance>
+  <toolChangeRetractionSpeed>2400</toolChangeRetractionSpeed>
+  <externalThinWallType>1</externalThinWallType>
+  <internalThinWallType>1</internalThinWallType>
+  <thinWallAllowedOverlapPercentage>50</thinWallAllowedOverlapPercentage>
+  <singleExtrusionMinLength>1</singleExtrusionMinLength>
+  <singleExtrusionMinPrintingWidthPercentage>50</singleExtrusionMinPrintingWidthPercentage>
+  <singleExtrusionMaxPrintingWidthPercentage>200</singleExtrusionMaxPrintingWidthPercentage>
+  <singleExtrusionEndpointExtension>0.2</singleExtrusionEndpointExtension>
+  <horizontalSizeCompensation>0</horizontalSizeCompensation>
+  <autoConfigureMaterial name="PLA">
+    <temperatureController name="Extruder 1">
+      <temperatureNumber>0</temperatureNumber>
+      <isHeatedBed>0</isHeatedBed>
+      <stabilizeAtStartup>1</stabilizeAtStartup>
+      <setpoint layer="1" temperature="215"/>
+    </temperatureController>
+    <temperatureController name="Extruder 2">
+      <temperatureNumber>1</temperatureNumber>
+      <isHeatedBed>0</isHeatedBed>
+      <stabilizeAtStartup>1</stabilizeAtStartup>
+      <setpoint layer="1" temperature="220"/>
+    </temperatureController>
+    <globalBedTemperature>60</globalBedTemperature>
+    <extruder name="Extruder 1">
+      <toolheadNumber>0</toolheadNumber>
+      <diameter>0.4</diameter>
+      <autoWidth>0</autoWidth>
+      <width>0.45</width>
+      <extrusionMultiplier>1</extrusionMultiplier>
+      <useRetract>1</useRetract>
+      <retractionDistance>1.5</retractionDistance>
+      <extraRestartDistance>0</extraRestartDistance>
+      <retractionZLift>0</retractionZLift>
+      <retractionSpeed>2400</retractionSpeed>
+      <useCoasting>0</useCoasting>
+      <coastingDistance>0.2</coastingDistance>
+      <useWipe>1</useWipe>
+      <wipeDistance>3</wipeDistance>
+    </extruder>
+    <extruder name="Extruder 2">
+      <toolheadNumber>1</toolheadNumber>
+      <diameter>0.4</diameter>
+      <autoWidth>0</autoWidth>
+      <width>0.4</width>
+      <extrusionMultiplier>0.96</extrusionMultiplier>
+      <useRetract>1</useRetract>
+      <retractionDistance>1.5</retractionDistance>
+      <extraRestartDistance>0</extraRestartDistance>
+      <retractionZLift>0</retractionZLift>
+      <retractionSpeed>1800</retractionSpeed>
+      <useCoasting>0</useCoasting>
+      <coastingDistance>0.2</coastingDistance>
+      <useWipe>1</useWipe>
+      <wipeDistance>5</wipeDistance>
+    </extruder>
+    <fanSpeed>
+      <setpoint layer="1" speed="0"/>
+      <setpoint layer="2" speed="50"/>
+      <setpoint layer="3" speed="100"/>
+    </fanSpeed>
+  </autoConfigureMaterial>
+  <autoConfigureMaterial name="ABS">
+    <globalExtruderTemperature>225</globalExtruderTemperature>
+    <globalBedTemperature>100</globalBedTemperature>
+    <globalExtrusionMultiplier>1</globalExtrusionMultiplier>
+    <fanSpeed>
+      <setpoint layer="1" speed="0"/>
+    </fanSpeed>
+  </autoConfigureMaterial>
+  <autoConfigureMaterial name="PVA">
+    <globalExtruderTemperature>195</globalExtruderTemperature>
+    <globalBedTemperature>80</globalBedTemperature>
+    <globalExtrusionMultiplier>1</globalExtrusionMultiplier>
+    <fanSpeed>
+      <setpoint layer="1" speed="0"/>
+      <setpoint layer="2" speed="100"/>
+    </fanSpeed>
+  </autoConfigureMaterial>
+  <autoConfigureMaterial name="Nylon">
+    <globalExtruderTemperature>220</globalExtruderTemperature>
+    <globalBedTemperature>80</globalBedTemperature>
+    <globalExtrusionMultiplier>1</globalExtrusionMultiplier>
+    <fanSpeed>
+      <setpoint layer="1" speed="0"/>
+    </fanSpeed>
+  </autoConfigureMaterial>
+  <autoConfigureQuality name="Fast">
+    <layerHeight>0.3</layerHeight>
+    <topSolidLayers>3</topSolidLayers>
+    <bottomSolidLayers>3</bottomSolidLayers>
+    <skirtLayers>1</skirtLayers>
+    <infillPercentage>15</infillPercentage>
+    <supportInfillPercentage>25</supportInfillPercentage>
+  </autoConfigureQuality>
+  <autoConfigureQuality name="Medium">
+    <layerHeight>0.2</layerHeight>
+    <topSolidLayers>6</topSolidLayers>
+    <bottomSolidLayers>5</bottomSolidLayers>
+    <skirtLayers>1</skirtLayers>
+    <infillPercentage>25</infillPercentage>
+    <supportInfillPercentage>30</supportInfillPercentage>
+  </autoConfigureQuality>
+  <autoConfigureQuality name="High">
+    <layerHeight>0.1</layerHeight>
+    <topSolidLayers>4</topSolidLayers>
+    <bottomSolidLayers>4</bottomSolidLayers>
+    <skirtLayers>2</skirtLayers>
+    <infillPercentage>30</infillPercentage>
+    <supportInfillPercentage>40</supportInfillPercentage>
+  </autoConfigureQuality>
+  <autoConfigureExtruders name="Extruder 1 Only" allowedToolheads="1">
+    <primaryExtruder>0</primaryExtruder>
+    <raftExtruder>0</raftExtruder>
+    <skirtExtruder>0</skirtExtruder>
+    <infillExtruder>0</infillExtruder>
+    <supportExtruder>1</supportExtruder>
+    <denseSupportExtruder>1</denseSupportExtruder>
+    <useSkirt>1</useSkirt>
+    <usePrimePillar>0</usePrimePillar>
+    <useOozeShield>0</useOozeShield>
+    <startingGcode>G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z15.0 F9000 ;move the platform down 15mm,G1 X0.1 Y20 Z0.3 F5000.0 ; move to start-line position,G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line,G1 X0.4 Y200.0 Z0.3 F5000.0 ; move to side a little,G1 X0.4 Y20 Z0.3 F1500.0 E30 ; draw 2nd line,; G1 E27 F3000 ; retract filament 3mm,G92 E0 ; reset extruder,; done purging extruder,G1 Z1.0 F3000 ; move z up little to prevent scratching of surface,M117 Printing...</startingGcode>
+    <toggleTemperatureController name="Extruder 1" status="on" stabilize="on"/>
+    <toggleTemperatureController name="Extruder 2" status="on" stabilize="off"/>
+  </autoConfigureExtruders>
+  <autoConfigureExtruders name="Extruder 2 Only" allowedToolheads="1">
+    <primaryExtruder>1</primaryExtruder>
+    <raftExtruder>1</raftExtruder>
+    <skirtExtruder>1</skirtExtruder>
+    <infillExtruder>1</infillExtruder>
+    <supportExtruder>1</supportExtruder>
+    <denseSupportExtruder>1</denseSupportExtruder>
+    <useSkirt>1</useSkirt>
+    <usePrimePillar>0</usePrimePillar>
+    <useOozeShield>0</useOozeShield>
+    <startingGcode>G28 ; home all axes</startingGcode>
+    <toggleTemperatureController name="Extruder 1" status="off" stabilize="off"/>
+    <toggleTemperatureController name="Extruder 2" status="on" stabilize="on"/>
+  </autoConfigureExtruders>
+  <autoConfigureExtruders name="All Extruders" allowedToolheads="2">
+    <primaryExtruder>0</primaryExtruder>
+    <raftExtruder>1</raftExtruder>
+    <skirtExtruder>1</skirtExtruder>
+    <infillExtruder>0</infillExtruder>
+    <supportExtruder>1</supportExtruder>
+    <denseSupportExtruder>1</denseSupportExtruder>
+    <useSkirt>1</useSkirt>
+    <usePrimePillar>0</usePrimePillar>
+    <useOozeShield>0</useOozeShield>
+    <startingGcode>G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z0.5 F9000 ;move the platform down 0.5mm,,,,M117 Printing...</startingGcode>
+    <toggleTemperatureController name="Extruder 1" status="on" stabilize="on"/>
+    <toggleTemperatureController name="Extruder 2" status="on" stabilize="on"/>
+  </autoConfigureExtruders>
+</profile>