Default PLA Medium All Extruders 0 0.4 0 0.45 1 1 1.5 0 0 2400 0 0.2 1 3 1 0.4 0 0.4 0.96 1 1.5 0 0 1800 0 0.2 1 5 0 0.2 6 5 2 1 2 0 0 0 0 100 100 0.5 1 1 2 1 3 0 100 0.3 1 1 1 2 4 0 999 12 7 1 0 999 2 1 1 30 1 0 Grid Rectilinear 25 15 100 5 1 45,-45 1 45,-45 1 1 30 0.5 1 1 2 98 1 0.3 0 0 1 2 60 0 0 0 1 1 0 1 0 1 1 0 1 15 20 0 45 100 0 100 1 0 1 0 0 1 0 0 0 0 1 0 305 305 360 0 0 0 -1 -1 -1 1 -1 1 0,0|0,0|0,0|0,0|0,0|0,0 1 RepRap (Marlin/Repetier/Sprinter) r2 115200 0 G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z0.5 F9000 ;move the platform down 0.5mm,,,,M117 Printing... ,,{IF NEWTOOL=1}T1,;switch to new tool and do these things,;{IF NEWTOOL=1}M109 S220 T1 ;heat right tool to 240C before moving,;{IF NEWTOOL=1}G1 F800 E-3.0,{IF NEWTOOL=1}G1 F800 E5.0 ;Default purge,{IF NEWTOOL=1}G4 S5 ;Stabilize Hotend's pressure dwell 5 seconds,{IF NEWTOOL=1}G92 E0 ;Zero extruder,{IF NEWTOOL=1}G1 F10000 X325,{IF NEWTOOL=1}G1 F2400 E-3 ;Retract,{IF NEWTOOL=1}G1 F10000 X354,{IF NEWTOOL=1}G1 F800 E-5 ;Retract,{IF NEWTOOL=1}G1 F10000,,,{IF NEWTOOL=0}T0,; switch to new tool and do these things,;{IF NEWTOOL=0}M104 S200 T1 ;let right extruder cool to 200 while unused,;{IF NEWTOOL=0}G1 F1200 E-2.0,{IF NEWTOOL=0}G1 F1000 E5.0 ;Default purge,{IF NEWTOOL=0}G4 S2 ;Stabilize Hotend's pressure with dwell for 2 seconds,{IF NEWTOOL=0}G92 E0 ;Zero extruder,{IF NEWTOOL=0}G1 F10000 X-20,{IF NEWTOOL=0}G1 F2400 E-3 ;Retract,{IF NEWTOOL=0}G1 F10000 X-50,{IF NEWTOOL=0}G1 F2400 E-5 ;Retract,{IF NEWTOOL=0}G1 F10000, M104 T0 S0 ;1st extruder heater off,M104 T1 S0 ;2nd extruder heater off,M140 S0 ;heated bed heater off (if you have it),G91 ;relative positioning,G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure,G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more,G28 X0 Y300 ;move X/Y to min endstops, so the head is out of the way,M84 ;steppers off,G90 ;absolute positioning gcode 0 Random Song 3600 0.5 0.8 0.8 15000 1002 50 0 1 1 0 0 0 1.75|1.75|1.75|1.75|1.75|1.75 800|1500|46|46|46|46 1|1|1.25|1.25|1.25|1.25 0 0 0 0 0 20 1 0 0 1 0 3 1 0 0 3 3 0 2400 1 1 50 1 50 200 0.2 0 0 0 1 1 0 1 60 0 0.4 0 0.45 1 1 1.5 0 0 2400 0 0.2 1 3 1 0.4 0 0.4 0.96 1 1.5 0 0 1800 0 0.2 1 5 225 100 1 195 80 1 220 80 1 0.3 3 3 1 15 25 0.2 6 5 1 25 30 0.1 4 4 2 30 40 0 0 0 0 1 1 1 0 0 G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z15.0 F9000 ;move the platform down 15mm,G1 X0.1 Y20 Z0.3 F5000.0 ; move to start-line position,G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line,G1 X0.4 Y200.0 Z0.3 F5000.0 ; move to side a little,G1 X0.4 Y20 Z0.3 F1500.0 E30 ; draw 2nd line,; G1 E27 F3000 ; retract filament 3mm,G92 E0 ; reset extruder,; done purging extruder,G1 Z1.0 F3000 ; move z up little to prevent scratching of surface,M117 Printing... 1 1 1 1 1 1 1 0 0 G28 ; home all axes 0 1 1 0 1 1 1 0 0 G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 ;Move to min endstops,G1 Z0.5 F9000 ;move the platform down 0.5mm,,,,M117 Printing...