From 16ffa62ee27fda8cd667a1c7c67d906c60a2dd72 Mon Sep 17 00:00:00 2001 From: Zruncho Date: Wed, 2 Nov 2022 22:39:09 -0700 Subject: [PATCH] Clarify spacers --- PARTS.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/PARTS.md b/PARTS.md index 94e6ca1..309653c 100644 --- a/PARTS.md +++ b/PARTS.md @@ -14,7 +14,7 @@ NOTE: the parts listed here represent only those which go on T0-specific parts. | Z Drives | GT2 16t pulleys | 3 | Z Drive pulleys | Z Drives | MGN7H 150mm | 2 | Ideally, upgrade to MGN9C on the X carriage, then get only one of these to repurpose for a front Z drive. See other notes below. | Z Drives | F623 bearings | 6 | Idlers | -| Z Bed | Metal spacers | 3 | Typically 1/2" (12.7mm) or slightly larger, depending on the height of your bed. Can be loose; will be fine, once tightened down.| +| Z Bed | Metal or ceramic spacers | 3 | Typically 1/2" (12.7mm) length M3 spacers or slightly longer, but it depends on your bed height, magnet height (if any), and flexplate height; 14-15mm will be needed for beds without magnets. Holes need to be at least 3mm in diameter, but can be larger without issues (6-32, 8-32, etc). | | Z Bed | Wago 221-412 | 6-8 | 2-position electrical connector **Frame**