3dprint/tri-zero
2
0
Fork 0
mirror of https://github.com/zruncho3d/tri-zero.git synced 2023-02-25 22:19:40 +04:00
Code Releases Activity

README.md: further clarify endstop board.

Browse source
This commit is contained in:
zruncho3d 2022-07-24 23:23:14 -04:00 • committed by GitHub
parent 18e15970a1
commit c788a07506
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

2
README.md
View file

@ -169,7 +169,7 @@ This BOM preview is for Alpha-4, though there's no expectation that these parts
| Z Drives | MGN7H 150mm | 2 | Ideally upgrade to MGN9C on the X carriage and then get only one of these to repurpose for a front Z drive. See the nte below.
| Z Drives | NEMA14 or NEMA17 motors | 3 | Needs to have enough hold torque. Mid-size (33mm body length) NEMA14 are marginal, while long (48mm body length) NEMA14 or most mid-to-large NEMA17 will provide enough unpowered hold torque to keep the bed from dropping. Ideally 0.9mm for extra resolution. Mix and match should be fine. Use what you've got. The Z drive motors barely matter.
| Z Drives | F623 bearings | 6 | Idlers |
| Bed | Sexbolt endstop kit | 1 | Adding a sexbolt endstop kit enables Auto-Z and is highlight recommended; optionally, repurpose the original Z endstop and use the ZeroClick probe as a virtual endstop in Klipper to remove this added requirement. |
| Bed | Sexbolt endstop kit | 1 | Adding a sexbolt endstop kit enables Auto-Z and is highlight recommended; optionally, repurpose the original Z endstop and use the ZeroClick probe as a virtual endstop in Klipper to remove this added requirement. Yes, the microswitch will need to flipped to the other side if your hartk endstop board comes pre-soldered, so ideally ask for a not-yet-soldered one. |
| Frame | Guitar Feet | 4 | Optional; same as used with Voron Trident. Can use original V0.1 rubber feet instead.
In addition, you'll need parts for ZeroClick, plus some way to get extra drivers.