diff --git a/PARTS.md b/PARTS.md
index a12e116..94e6ca1 100644
--- a/PARTS.md
+++ b/PARTS.md
@@ -15,6 +15,7 @@ NOTE: the parts listed here represent only those which go on T0-specific parts.
 | Z Drives | MGN7H 150mm | 2 | Ideally, upgrade to MGN9C on the X carriage, then get only one of these to repurpose for a front Z drive.  See other notes below.
 | Z Drives | F623 bearings | 6 | Idlers |
 | Z Bed | Metal spacers | 3 | Typically 1/2" (12.7mm) or slightly larger, depending on the height of your bed.  Can be loose; will be fine, once tightened down.|
+| Z Bed | Wago 221-412 | 6-8 | 2-position electrical connector
 
 **Frame**
 
@@ -26,7 +27,6 @@ See above for options: a medium-preload MGN9C with matching carriage is highly r
 
 [This V0 carriage](https://github.com/zruncho3d/DuelingZero/blob/main/STLs/Low_Side_X_Carriage_x1.stl) is recommended to match.  
 
-
 **Electronics**:
 
 Two additional Z-drive stepper ports are needed.  Pretty much anything will work, and the Klipper changes are minimal.