From f037c8f6d749db230954aa68d69e89e2b8b41d2a Mon Sep 17 00:00:00 2001
From: Zruncho <zruncho3d@gmail.com>
Date: Mon, 31 Oct 2022 23:02:54 -0700
Subject: [PATCH] Fix unclear item

---
 INSTRUCTIONS.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/INSTRUCTIONS.md b/INSTRUCTIONS.md
index e22fe26..22ba8cc 100644
--- a/INSTRUCTIONS.md
+++ b/INSTRUCTIONS.md
@@ -32,9 +32,9 @@ For conversions, of course!
 * Remove the V0 Z assembly
   * .. but leave the rear verticals in place
   * Remove bedframe (possibly by removing the rail M2 screws... that's one way)
-  * Take it all off.  You'll need the extrusions.
+  * Take apart the bedframe, as you'll need the 100mm extrusions later
   * Remove Z railstops
-  * Remove rear Z motor/stepper unit
+  * Remove rear Z motor/stepper unit and printed mount
 * Remove baseplate
   * Loosen screws on front horizontal extrusion and/or front verticals.
   * Cut 20mm-wide, 15mm-deep notches on each side of the original baseplate, matching the CAD and the DXF.  Use flush cutters with ABS or a dremel or band saw with ACM.