3dprint/tri-zero
2
0
Fork 0
mirror of https://github.com/zruncho3d/tri-zero.git synced 2023-02-25 22:19:40 +04:00
Code Releases Activity

Clarify spacers

Browse source
This commit is contained in:
Zruncho 2022-11-02 22:39:09 -07:00
parent e4a54cb531
commit 16ffa62ee2
1 changed files with 1 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

2
PARTS.md
View file

@ -14,7 +14,7 @@ NOTE: the parts listed here represent only those which go on T0-specific parts.
| Z Drives | GT2 16t pulleys | 3 | Z Drive pulleys
| Z Drives | MGN7H 150mm | 2 | Ideally, upgrade to MGN9C on the X carriage, then get only one of these to repurpose for a front Z drive. See other notes below.
| Z Drives | F623 bearings | 6 | Idlers |
| Z Bed | Metal spacers | 3 | Typically 1/2" (12.7mm) or slightly larger, depending on the height of your bed. Can be loose; will be fine, once tightened down.|
| Z Bed | Metal or ceramic spacers | 3 | Typically 1/2" (12.7mm) length M3 spacers or slightly longer, but it depends on your bed height, magnet height (if any), and flexplate height; 14-15mm will be needed for beds without magnets. Holes need to be at least 3mm in diameter, but can be larger without issues (6-32, 8-32, etc). |
| Z Bed | Wago 221-412 | 6-8 | 2-position electrical connector
**Frame**