3dprint/tri-zero
2
0
Fork 0
mirror of https://github.com/zruncho3d/tri-zero.git synced 2023-02-25 22:19:40 +04:00
Code Releases Activity

Nate Wagos P/N

Browse source
This commit is contained in:
Zruncho 2022-11-01 22:45:31 -07:00
parent 05205de062
commit e4a54cb531
1 changed files with 1 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

2
PARTS.md
View file

@ -15,6 +15,7 @@ NOTE: the parts listed here represent only those which go on T0-specific parts.
| Z Drives | MGN7H 150mm | 2 | Ideally, upgrade to MGN9C on the X carriage, then get only one of these to repurpose for a front Z drive. See other notes below.
| Z Drives | F623 bearings | 6 | Idlers |
| Z Bed | Metal spacers | 3 | Typically 1/2" (12.7mm) or slightly larger, depending on the height of your bed. Can be loose; will be fine, once tightened down.|
| Z Bed | Wago 221-412 | 6-8 | 2-position electrical connector
**Frame**
@ -26,7 +27,6 @@ See above for options: a medium-preload MGN9C with matching carriage is highly r
[This V0 carriage](https://github.com/zruncho3d/DuelingZero/blob/main/STLs/Low_Side_X_Carriage_x1.stl) is recommended to match.
**Electronics**:
Two additional Z-drive stepper ports are needed. Pretty much anything will work, and the Klipper changes are minimal.